2NM/2NX/2NY/2NZ/2P0/2P6
1-5-27
10. Remove two screws.
11. Remove the top tray cover upward.
Figure 1-5-44
12. Pull the connector and FFC from control
PWB out.
13. Pull the connector and FFC out through
the apertures.
14. Remove four screws and then remove
the laser scanner unit upward.
15. Check or replace the laser scanner unit
and refit all the removed parts.
Figure 1-5-45
YC15
YC16
Screw
Screw
Screw
Screw
Apertures
Connector
Control PWB
Laser
scanner unit
FFC
To Next Page
Loading...
