LeCroy WaveRunner Xi-A - Restoring Software; Restarting the Application; Restarting the Operating System; External Monitor

WAVERUNNER Xi-A AND MXi-A SERIES
16 WRXi-A-GSM-E Rev A
RestoringSoftware
Restarting the Application
Uponinitialpower‐up,theoscilloscopeloadstheinstrumentapplicationsoftware
automatically.
• Ifyouexittheapplicationandwanttoreloadit,touchtheshortcuticononthe
desktop:


• Ifyouminimizetheapplication,touchthedesktopicontomaximizeit:

Restarting the Operating System
IfyouneedtorestarttheWindows®operatingsystem,youmustrebootthe
oscilloscopebypressingthepowerswitch,andthenturningthepowerbackon
afteraten‐secondwait.
ExternalMonitor
YourWaveRunnerXiSeriesoscilloscope’smotherboardcontainsadual‐videochip.
Thisenablesextensionofthedesktopovertwomonitorsortodisplayacloneofthe
oscilloscopescreenonanexternalmonitor.
Forexample,inextendedmode,thescopecanbeshowingtheUIontheinternal
monitorandanotherapplicationlikeExcel®onth
eexternalmonitor,orviceversa.
Or,turnthescopemonitoroffandviewthescopeUIonlyfromtheexternal
monitorifdesired.