LeCroy WaveRunner Xi-A - Manually Setting the Date and Time; Setting the Date and Time from the Internet; Setting the Date and Time from Windows; Options

WAVERUNNER Xi-A AND MXi-A SERIES
92 WRXi-A-GSM-E Rev A
Manually Setting the Date and Time
1. TouchUtilitiesÆUtilitiesSetup...fromthemenubar.
2. TouchtheDate/Timetab.
3. TouchinsideeachoftheHour,Minute,Second,Day,Month,andYear
fieldsandenteravalue,usingthepop‐upnumerickeypad.
4. TouchtheValidateChangesbutton.
Setting the Date and Time from the Internet
TheSimpleNetworkTimeProtocol(SNTP)isused.
1. EnsurethattheoscilloscopeisconnectedtotheInternetthroughtheLAN
connectorattherearoftheinstrument.
2. TouchUtilitiesÆUtilitiesSetup...fromthemenubar.
3. TouchtheDate/Timetab.
4. TouchtheSetfromInternetbutton.
Setting the Date and Time from Windows
1. TouchUtilitiesÆUtilitiesSetup...fromthemenubar.
2. TouchtheDate/Timetab.
3. TouchtheWindowsDate/Timebutton


4. UsetheTime&DatePropertieswindowtoconfigurethetime,including
timezone.
Options
Usethisdialogtoaddorremovesoftwareoptions.Forinformationaboutsoftware
options,contactyourlocalLeCroySalesandServiceoffice,orvisitourWebsiteat
http://www.lecroy.com/options
.