Viva Series, Instrument connections - All other connections 342
Next step
Set 2DCQ to Editable field The estimated value for the position quality assigned
to all hidden points. This value must be estimated
because hidden point measurement devices do not
output position qualities.
Compute
height for
hidden points
Check box Select to compute a hidden point with height.
Set 1DCQ to Editable field Available when Compute height for hidden points is
checked. The estimated value for the height quality
assigned to all hidden points.
IF height and external
angle/distance offsets
THEN
are not to be configured OK closes the screen and returns to the screen from where
Hidden Point Measurement was accessed.
are to be configured Offset...
Field Option Description
To Next Page
