Viva Series, Jobs & Data - Jobs 65
5 Jobs & Data - Jobs
5.1 Overview
Description Jobs
• structure surveying projects.
• contain all points, lines, areas and codes that are measured/recorded and stored.
• can be downloaded to LGO for post-processing or for data transfer to a further program.
• can be uploaded from LGO, for example, for (real-time) stakeout operations.
• can be stored on the data storage device or, if fitted, the internal memory.
Type of jobs • Data jobs. Explained in this chapter.
• DTM files. Refer to "50.6 Staking Out a DTM or Points & DTM".
•Road alignment files.
Default job A job called Default is available on the instrument after: formatting the memory device,
inserting a previously formatted data storage device or deleting all jobs from Job properties.
Working job The working job is the one data is stored to. One job is always considered the working job.
After formatting the memory device, the job Default is used until a user-defined job is
created and selected.
When a job becomes the working job, then the sort and filter settings of this job are saved
in the SystemRAM. If the data storage device is formatted then these last used sort and filter
settings are used for the job Default.
To Next Page
Loading...
