Viva Series, Configuration of Devices 443
20 Configuration of Devices
20.1 Devices
20.1.1 Overview
Description Before using any device, it is necessary to configure the interface with which it will be used.
Refer to "18.1 Accessing Configuration Connections" for information on how to configure
the interfaces.
Some devices can be used with different interfaces for different applications. For example:
• A radio can be used to receive real-time base data but a second radio could also
be used to output simultaneous NMEA messages.
• A radio can be used for remote control with a TPS but also to send GeoCOM
commands from a computer to a TPS.
To Next Page
Loading...
