Viva Series, Coding 540
25.2 Thematical Coding
25.2.1 Thematical Coding with Codelist
Requirements • The job codelist contains thematical codes for points, lines and/or areas.
• Use a list box to view codes is checked in Coding & Linework Settings.
• A survey screen page with an editable field for codes must be configured.
Access Open the selectable list for Code in a survey screen page of an application.
OR
Open the selectable list for a Code/Point code in New Point, Code page. The procedure
is similar for lines and areas.
OR
Open the selectable list for Point code in Edit Point:, Code page. The procedure is similar
for lines and areas.
OR
Open the selectable list for Code (auto) in Survey, Auto page, if configured.
Select Code Select Code is shown as an example.
Depending on the setting for Automatically create lines & areas when coding in Coding &
Linework Settings, Linework page, either;
• all point, line and area codes are available for selection, or
• only those point codes from the job codelist, which belong to an active code group,
are available for selection.
To Next Page
