Viva Series, Determine Coordinate System 889
39.3 The Normal Method
39.3.1 Configuring the Normal Method
Description The configuration allows options to be set, which are used in the Determine Coordinate
System application. These settings are stored within the active working style.
Access Press Config.. in Choose WGS84 & Local Jobs with Use one point localisation method NOT
checked.
Configuration,
Residuals page
The explanations for the softkeys given here are valid for all pages, unless otherwise stated.
Key Description
OK To accept changes and return to the screen from where this screen was
accessed.
Page To change to another page on this screen.
Fn Quit To exit the screen.
To Next Page
