Cleaning synchronization and
Remote alarm System (CRS+)
Chapter 4 - page 22
M-HE.002.1003
• Modem country code
Applies to analogous modem installations. Certain countries require different modem settings.
• Dial method
Applies to analogous modem installations. To select for tone or pulse network.
4.7.12 Temporary suppression of alarms
The temporary (60 min.) suppression of the alarm can be set by means of the menu shown below. This means
that both the alarm buzzer and the telephone call are temporarily inactive (figure 4.20).
If "yes" was selected, the newly generated alarms will be suppressed as well (very practical during robot main-
tenance).
Alarm system →
Cleaning system →
Settings →
Tests →
Event history →
List of active alarms →
Clear alarm list →
History of alarms →
Ignore alarms next 60 min.? → (yes/no)
To Next Page
Loading...
