LELY ASTRONAUT - Menu Option Alarm System; Menu Option Cleaning System

Chapter 4 - page 5
Operator’s manual ASTRONAUT
M-HE.002.1003
4.4.1 Menu option "Alarm system"
The following submenus are displayed under the main menu option "Alarm system" (figure 4.20):
• List of active alarms
Checking active alarms.
• History of alarms
The history of alarms is shown via this menu. Once selected, the most recent alarm (by date and time) is
indicated on the bottom line.
NOTE
• Alarms that are generated by the milking robot A, must be acknowledged at milking robot A as well.
• Clear alarm list
By selecting "yes" all listed alarms are cleared.
• Ignore alarms next 60 min.?
By selecting "yes" all active alarms are suppressed for 60 minutes (i.e. no buzzer or telephone call).
4.4.2 Menu option "Cleaning system"
The following submenu functions are displayed under the menu option "Cleaning system" (figure 4.20):
• Cluster operation
To ensure a robot cluster is operative/inoperative
• Open milk tank valve
Opening the milk tank valve so that the tank can be emptied.
Alarm system →
Cleaning system →
Settings →
Tests →
Event history →
List of active alarms →
History of alarms →
Clear alarm list →
Ignore alarms next 60 min.? →
Alarm system →
Cleaning system →
Settings →
Tests →
Event history →
Cluster operation → (in oper./going out/out oper./going in)
Open milk tank valve → (open/closed)
Blow empty milk line → (sent)
Cluster operation → (in oper./going out/out oper./going in)
Open milk tank valve → (open/closed)
Blow empty milk line → (sent)