Service and maintenance
Chapter 6 - page 8
M-HE.002.1003
6.2.2 Weekly maintenance
• Put the robot out of operation before starting maintenance procedures.
Teat cup liners:
Always replace the teat cup liners on time.
Each teat cup liner can be used for a number of milkings, depending on the manufacturer and model type (type
"Silicone 7500 milkings"). The menu Milking > Lely Astronaut of the X-pert programme (figure 5.12) displays the
number of milkings per day. The menu option shown below (figure 6.11) represents the same in T4C.
Example:
According to the manufacturer the teat liners can be utilized for approx. 7500 milkings. Per day a series of 150
milkings is carried out by the robot.
Estimate:
NOTE
• The teat liners must be replaced at least every 8 to 10 weeks.
7500 milkings
= 50 days
150 milkings
Figure 6.11 Menu option Farm > Milking > Dayproduction (T4C)
To Next Page
Loading...
