2 Safety instrucons
Disregarding the following basic safety measures and safety informaon may lead to severe
per
sonal injury and damage to property!
Observe all specicaons of the corresponding documentaon supplied. This is the
precondion for safe and trouble-free operaon and for obtaining the product features
specied.
Please observe the specic safety informaon in the other secons!
2.1 Basic safety instrucons
DANGER!
Danger to life due to electrical voltage!
The pr
oduct's power connecons can sll be carrying voltage when the mains supply has been
switched o.
Possible consequences: Death, severe injury, or burns
▶
Do not touch the power connecons immediately.
▶
Take note of the corresponding warning plates on the product.
▶
Check power terminals for isolaon from supply.
DANGER!
Dangerous electrical voltage
P
ossible consequences: Death or severe injuries from electric shock
▶
Any work on the device must only be carried out in a deenergized state.
▶
Aer switching o the mains voltage, observe the signs on the product.
DANGER!
Incorrect sengs during commissioning may cause unexpected and dangerous motor and
s
ystem movements.
Possible consequences: death, severe injuries or damage to property
▶
Clear hazardous area.
▶
Observe safety instrucons and safety clearances.
Personnel
The product must only be used by qualied personnel. IEC 60364 or CENELEC HD 384 dene
the skills of these persons:
•
The
y are familiar with installing, mounng, commissioning, and operang the product.
•
They have the corresponding qualicaons for their work.
•
They know and can apply all regulaons for the prevenon of accidents, direcves, and
laws applicable at the place of use.
Process engineering
The procedural notes and circuit details described are only proposals. It is up to the user to
check whether they can be adapted to the parcular applicaons. Lenze does not take any
responsibility for the suitability of the procedures and circuit proposals described.
Safety
instrucons
Basic safety instrucons
11