Lenze i410 - Motor Data

5.7 Motor data
The term "motor data" comprises all parameters only depending on the motor and only
char
acterising the electrical behaviour of the motor. Motor data are independent of the
applicaon in which the inverter and the motor are used.
Precondions
The equivalent circuit data ("Sengs" tab, path: "Basic seng\motor", parameterisaon
dialog "Derived motor properes and equivalent circuit") apply to a motor in star connecon.
In case of a motor in delta connecon, the delta values must be converted into equivalent star
values.
Possible sengs
If a Lenze motor is connected to the inverter, you can select the motor in the engineering tool
from the "motor catalogue".
•
For details see chapter "Select motor from motor catalog". ^ 40
Otherwise the motor data must be set manually (for details see chapter "Manual seng of
the motor data“). ^ 41
Basic seng
Motor data
39