Lenze i410 - Page 110

Address Name / seng range / [default seng] Informaon
0x401F:005 PID Feedforward value
•
R
ead only: x.x Hz
•
From version 03.00
Display of the feedforward control value for the process controller.
0x401F:006 PID output value
•
Read only: x.x Hz
•
From version 03.00
Display of the current process controller setpoint that is internally
transferred to the motor control (considering the feedforward control
value).
0x401F:007 PID error value
•
R
ead only: x.xx PID unit
•
From version 03.00
Display of the dierence between reference value (setpoint) and
feedback variable (actual value) of the process controller.
Conguring the frequency control
Conguring the process controller
Pr
ocess controller diagnoscs
110