EasyManua.ls Logo

Lenze i410 - Page 157

Lenze i410
334 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Valid and invalid ranges:
Ex
ample on the le: Skip frequency = 5 Hz, bandwidth = 10 Hz à V
alid range (starts at ≥ 0)
Example on the right: Skip frequency = 4 Hz, bandwidth = 10 Hz à Invalid range (starts at <
0); is thus ignored.
[Hz]
[Hz]
[Hz]
[Hz]
Output
Input Input
Output
Parameter
Address Name / seng range / [default seng] Informaon
0x291F:001
(P317.01)
Skip frequencies: Skip frequency 1
(Skip fr
equencies: Skip frequency 1)
0.0 ... [0.0] ... 599.0 Hz
Center of frequency range 1 which is to be skipped.
0x291F:002
(P317.02)
Skip frequencies: Skip bandwidth 1
(Skip frequencies: Skip bandwidth 1)
0.0 ... [0.0] ... 10.0 Hz
Size of frequency range 1 which is to be skipped.
0x291F:003
(P317.03)
Skip frequencies: Skip frequency 2
(Skip frequencies: Skip frequency 2)
0.0 ... [0.0] ... 599.0 Hz
Center of frequency range 2 which is to be skipped.
0x291F:004
(P317.04)
Skip frequencies: Skip bandwidth 2
(Skip frequencies: Skip bandwidth 2)
0.0 ... [0.0] ... 10.0 Hz
Size of frequency range 2 which is to be skipped.
0x291F:005
(P317.05)
Skip frequencies: Skip frequency 3
(Skip frequencies: Skip frequency 3)
0.0 ... [0.0] ... 599.0 Hz
Center of frequency range 3 which is to be skipped.
0x291F:006
(P317.06)
Skip frequencies: Skip bandwidth 3
(Skip frequencies: Skip bandwidth 3)
0.0 ... [0.0] ... 10.0 Hz
Size of frequency range 3 which is to be skipped.
0x291F:016 Skip frequencies: Status
Read only
Bit-coded status display of the skip frequencies.
Bit 0 Blocking zone 1 acve
Bit 1 Blocking zone 2 acve
Bit 2 Blocking zone 3 acve
Bit 4 Frequency above blocking zone 1
Bit 5 Frequency above blocking zone 2
Bit 6 Frequency above blocking zone 3
Bit 8 Blocking zone 1 invalid
Bit 9 Blocking zone 2 invalid
Bit 10 Blocking zone 3 invalid
0x291F:032 Skip frequencies: Input frequency
Read only: x.xx Hz
Display of the skip lter input frequency.
0x291F:033 Skip frequencies: Output frequency
Read only: x.xx Hz
Display of the skip lter output frequency.
Conguring the motor control
P
arameterisable motor funcons
Skip frequencies
157

Table of Contents

Other manuals for Lenze i410

Related product manuals