Lexmark MS81 Series - Base Printer - Left Removals

3 Remove the separator roller assembly.
Base printer - left removals
• “Controller board removal” on page 340
•
“Controller board access cover removal” on page 341
• “Controller board access shield removal” on page 342
• “Fuser drive motor removal” on page 342
•
“Main cooling fan removal” on page 344
• “Main drive motor removal” on page 345
•
“Media feeder removal” on page 347
• “PCBA housing removal” on page 348
• “Sensor (control panel interlock) removal” on page 350
•
“Sensor (pick roller position) removal” on page 351
• “Toner add motor removal” on page 352
4063
Repair information
339