Safety Information
Read and follow all safety instructions in this manual precisely to avoid unsafe operating
conditions, property damage, personal injury, or death.
Safety symbols in this manual
Indicates an imminently hazardous situation which, if not avoided, will result in severe injury or death.
Indicates a potentially hazardous situation which, if not avoided, could result in injury or death.
Indicates a potentially hazardous situation that, if not avoided, could result in minor injury or property
damage.
Safety information
• Do not open the cover of the equipment while it is on or operating. Likewise, do not operate the
inverter while the cover is open. Exposure of high voltage terminals or charging area to the external
environment may result in an electric shock. Do not remove any covers or touch the internal circuit
boards (PCBs) or electrical contacts on the product when the power is on or during operation. Doing
so may result in serious injury, death, or serious property damage.
• Do not open the cover of the equipment even when the power supply to the inverter has been
turned off unless it is necessary for maintenance or regular inspection. Opening the cover may result
in an electric shock even when the power supply is off.
• The equipment may hold charge long after the power supply has been turned off. Use a multi-meter
to make sure that there is no voltage before working on the inverter, motor or motor cable.
To Next Page
Loading...
Need help?
General
