Learning to Perform Basic Operations
3.3 Fault Monitoring
3.3.1 Monitoring Faults during Inverter Operation
The following example shows how to monitor faults that occurred during inverter operation.
• If a fault trip occurs during inverter operation, the inverter
enters Trip mode automatically and displays the type of fault
trip that occurred.
• Press the [▼] key to view the information on the inverter at
the time of fault, including the output frequency, output
current, and operation type.
• When the inverter is reset and the fault trip is released, the
keypad display returns to the screen it was at when the fault
trip occurred.
To Next Page
Loading...
