LSIS S100 User Manual

54
Learning to Perform Basic Operations
Parameter settings in other modes and groups
The following example shows how to change the frequency in the Drive group. This example can
also be applied to other modes and groups.
• This is the initial display for Parameter mode.
• Press the [▼] key.
• DRV-01 code is selected.
• Press the [PROG/ENT] key.
• The frequency can be changed at the flashing digit.
• Press the [◀]/ [▶] key to move the cursor to the desired
digit.
• Press the [▲] key to enter 10 Hz, and then press the
[PROG/ENT] key.
• The frequency is changed to 10 Hz.

LSIS S100 Specifications

General

Brand	LSIS
Model	S100
Category	DC Drives
Language	English