MacDon R85 - Page 140

214366 123 Revision A
Action ▲ Change
First 25 hours
ü
Check drive belt tension.
Refer to Inspecting the Conditioner
Drive Belt, page 159 and Inspecting
and Adjusting the Auger Drive Belts,
page 166.
Every 25 hours
S
Lube roll universal joints.
Refer to 5.2.4 Lubrication and
Servicing, page 126.
S
Lube cutterbar driveline bearings.
Refer to 5.2.4 Lubrication and
Servicing, page 126.
First 50 hours
ü
Check drive belt tension.
Refer to Inspecting the Conditioner
Drive Belt, page 159 and Inspecting
and Adjusting the Auger Drive Belts,
page 166.
▲
Change cutterbar lubricant.
Refer to 5.2.7 Lubricating the
Cutterbar, page 132
2
.
▲
Change bevel gearbox lubricant.
Refer to 5.4.1 Bevel Gearbox, page
158.
▲
Change conditioner gearbox lubricant.
Refer to 5.4.1 Bevel Gearbox, page
158.
Every 50 hours
S
Lube drive belt tensioner.
Refer to 5.2.4 Lubrication and
Servicing, page 126.
S
Lube roll shaft bearings.
Refer to 5.2.4 Lubrication and
Servicing, page 126.
S
Lube gauge roller bearings.
3
Every 100 hours or annually
ü
Check conditioner drive belt.
Refer to Inspecting the Conditioner
Drive Belt, page 159.
MAINTENANCE AND SERVICING
2. Use only the specified amount. DO NOT overfill
3. Optional
üü Check SS Lubricate