MacDon R85 - Page 141

214366 124 Revision A
Action üüCChheecckkSSLLuubbrriiccaattee ▲ Change
ü
Check auger drive belt.
Refer to Inspecting and Adjusting the
Auger Drive Belts, page 166.
ü
Check conditioner gearbox lubricant.
Refer to 5.4.3 Conditioner Gearbox,
page 162.
ü
Check bevel gearbox lubricant.
Refer to 5.4.1 Bevel Gearbox, page
158.
First 150 hours
▲
Change cutterbar lubricant.
Refer to 5.2.7 Lubricating the
Cutterbar, page 132
2
.
▲
Change bevel gearbox lubricant.
Refer to 5.4.1 Bevel Gearbox, page
158.
▲
Change conditioner gearbox lubricant.
Refer to 5.4.3 Conditioner Gearbox,
page 162.
Every 250 hours
4
▲
Change cutterbar lubricant.
Refer to 5.2.7 Lubricating the
Cutterbar, page 132
2
.
▲
Change bevel gearbox lubricant.
Refer to 5.4.1 Bevel Gearbox, page
158.
▲
Change conditioner gearbox lubricant.
Refer to 5.4.3 Conditioner Gearbox,
page 162.
MAINTENANCE AND SERVICING
4. Begins after the first 150 hour service