MAN B&W 5.11
Page of
MAN Diesel
198 41 765.6MAN B&W MC/MCC, ME/ME-C/MEGI/MEB engines
Engine Seating and Holding Down Bolts
Please note that the latest version of most of the
drawings of this section is available for download
at www.mandiesel.com under ‘Marine’ → ‘Low
Speed’ → ‘Installation Drawings’. First choose en-
gine series, then engine type and select ‘Engine
seating’ in the general section of the list of draw-
ings available for download.
Engine Seating and Arrangement of
Holding Down Bolts
The dimensions of the seating stated in Figs.
5.2.0 and 5.2.02 are for guidance only.
The engine is designed for mounting on epoxy
chocks, EoD 4 82 02, in which case the under-
side of the bedplate’s lower anges has no taper.
The epoxy types approved by MAN Diesel are:
• ‘Chockfast Orange PR 60 TCF’ from
ITW Philadelphia Resins Corporation, USA
• ‘Durasin’ from Daemmstoff
Industrie Korea Ltd
• ‘Epocast 36’ from
H.A. Springer - Kiel, Germany.
To Next Page
Loading...
Need help?
General