Man B&W S80ME-C7 User Manual

MAN B&W 18.04
Page 3 of 7
MAN Diesel
MAN B&W ME/MEC/MEGI/ME-B engines 198 45 838.4
Alarms for UMS – Class and MAN Diesel requirements
ABS BV CCS DNV GL KR LR NK RINA RS IACS MAN Diesel
Sensor and
function Point of location
Fuel oil
            PT 800 AL Fuel oil, inlet engine
            LS 8006 AH Leakage from high pressure pipes
Lubricating oil
           PT 803 AL Lubricating oil inlet to turbocharger/turbocharger
            TE 806 AH Thrust bearing segment
            PT 808 AL Lubricating oil inlet to main engine
            TE 82 AH Lubricating oil inlet to main engine
           TE 83 AH Piston cooling oil outlet/cylinder
           FS 84 AL Piston cooling oil outlet/cylinder
          TE 87 AH Turbocharger lubricating oil outlet from
turbocharger/turbocharger 2)
 TE 823 AH Main bearing oil outlet temperature/main bearing
(S40/35ME-B9 only)
 XC 826 AH Bearing wear (All types except S40/35ME-B9)
 XS 827 A Bearing wear detector failure (All types except S50-
35ME-B)
     PDS 840 AH
Lubricating oil differential pressure – cross lter
 XS 850 AH Water in lubricating oil
 XS 85 AH Water in lubricating oil – too high
 XS 852 A Water in lubricating oil sensor not ready
 Indicates that the sensor is required.
The sensors in the MAN Diesel column are included for Unattended Machinery Spaces (UMS), option: 4 75 27,
subject to class requirements and will be nally specied in the Guidance Values Automation for the specic
engine plant.
The sensor identication codes and functions are listed in Table 8.07.0.
The tables are liable to change without notice, and are subject to latest class requirements.
2) For turbochargers with slide bearings
Table 18.04.02a: Alarm functions for UMS

Man B&W S80ME-C7 Specifications

General

Brand	Man
Model	B&W S80ME-C7
Category	Engine
Language	English