MAN B&W 19.07
Page 1 of 2
MAN Diesel
MAN B&W MC/MC-C, ME/MEC/MEGI engines 198 46 367.5
Additional Spares
For easier maintenance and increased security in operation
Beyond class requirements
Cylinder Lubricating Oil System, section 90306
1 set Spares for MAN B&W Alpha lubricating oil
system for 1cyl.
1 Lubricator
2 Feed back sensor, complete
1 Complete sets of Orings for lubricator
(depending on No. of lubricating nozzles per.
cylinder)
Connecting rod and crosshead, section 90401
1 Telescopic pipe
2 Thrust piece
HPS Hydaulic Power Supply, section 906
1 Delivery pump
1 Start up pump
1 Pressure relief valve
1 Pumps short cutting valve
1 set Check valve Cartridge (3 pcs)
Engine Control System, section 906
1 set Fuses for MPC, TSA, CNR
1 Segment for triggerring
HCU Hydraulic Cylinder Unit, section 906
1 set Packings
Main starting valve, section 90702
1 Repair kit for main actuator
1 Repair kit for main ball valve
1 *) Repair kit for actuator, slow turning
1 *) Repair kit for ball valve, slow turning
*) if tted
Starting valve, section 90704
2 Locking plates
2 Piston
2 Spring
2 Bushing
1 set Oring
1 Valve spindle
Note:
Section numbers refers to Instruction Book, Vol. III containing plates with spareparts
Cylinder cover, section 90101
4 Studs for exhaust valve
4 Nuts for exhaust valve
½ set Orings for cooling jacket
1 Cooling jacket
½ set Sealing between cyl.cover and liner
4 Spring housings for fuel valv
Hydraulic tool for cylinder cover, section 90161
1 set Hydraulic hoses with protection hose
complete with couplings
8 pcs Orings with backup rings, upper
8 pcs Orings with backup rings, lower
Piston and piston rod, section 90201
1 box Locking wire, L=63 m
5 Piston rings of each kind
2 Drings for piston skirt
2 Drings for piston rod
Piston rod stufng box, section 90205
15 Self locking nuts
5 Orings
5 Top scraper rings
15 Pack sealing rings
10 Cover sealing rings
120 Lamellas for scraper rings
30 Springs for top scraper and sealing rings
20 Springs for scraper rings
Cylinder frame, section 90301
½ set Studs for cylinder cover for one cyl.
1 Bushing
Cylinder liner and cooling jacket, section 90302
1 Cooling jacket of each kind
4 Non return valves
1 set Orings for one cylinder liner
½ set Gaskets for cooling water connection
½ set Orings for cooling water pipes
1 set Cooling water pipes between liner and cover
for one cylinder
Fig. 19.07.01a: Additional spare parts beyond class requirements or recommendation, for easier maintenance and
increased availability, option: 4 87 603
To Next Page
Loading...
Need help?
General