MAN B&W 19.07
Page 2 of 2
MAN Diesel
MAN B&W MC/MC-C, ME/MEC/MEGI engines 198 46 367.5
Note:
Section numbers refers to Instruction Book, Vol. III containing plates with spareparts
Exhaust valve, section 90801
1 Exhaust valve spindle
1 Exhaust valve seat
½ set Oring exhaust valve/cylinder cover
4 Piston rings
½ set Guide rings
½ set Sealing rings
½ set Safety valves
1 set Gaskets and Orings for safety valve
1 Piston complete
1 Damper piston
1 set Orings and sealings between air piston and
exhaust valve housing/spindle
1 Liner for spindle guide
1 set Gaskets and Orings for cool.w.conn.
1 Conical ring in 2/2
1 set Orings for spindle/air piston
1 set Nonreturn valve
Exhaust valve, section 908
1 Sealing oil unit
Exhaust valve actuator, section 90805
1 Hydraulic exhaust valve actuator complete for
1 cylinder
1 Electronic exhaust valve control valve
Cooling water outlet, section 90810
2 Ball valve
1 Buttery valve
1 Compensator
1 set Gaskets for buttery valve and compensator
Fuel injection system, section 90901
1 Fuel oil pressure booster complete, for 1 cyl.
1 Hydraulic cylinder unit
1 set Gaskets and sealings
1 Electronic fuel injection cotrol valve
Fuel valve, section 90910
1 set Fuel nozzles
1 set Orings for fuel valve
3 Spindle guides, complete
½ set Springs
½ set Discs, +30 bar
3 Thrust spindles
3 Non return valve (if mounted)
Fuel oil high pressure pipes, section 90913
1 High pressure pipe, from fuel oil pressure
booster to fuel valve
1 High pressure pipe from actuator to exhaust
valve
1 set Orings for high pressure pipes
Overow valve, section 90915
1 Overow valve, complete
1 Orings of each kind
Turbocharger, section 91000
1 Spare rotor, complete with bearings
1 Spare part set for turbocharger
Scavenge air receiver, section 91001
2 Nonreturn valves complete
1 Compensator
Exhaust pipes and receiver, section 91003
1 Compensator between TC and receiver
2 Compensator between exhaust valve and re-
ceiver
1 set Gaskets for each compensator
Air cooler, section 91005
16 Iron blocks (Corrosion blocks)
Safety valve, section 91101
1 set Gasket for safety valve
2 Safety valve, complete
Arrangement of safety cap, section 91104
1 set Bursting disc
Engine Lubricating System, section 912
1 set 10 µ lter
Fig. 19.07.01b: Additional spare parts beyond class requirements or recommendation, for easier maintenance and
increased availability, option: 4 87 603
To Next Page
Loading...
Need help?
General