Micom P634 - Page 435

Parameter Address
Default Min Max Unit Logic Diagram
[spacer]
MAIN: Latching trip cmd. 3
021 025
0: No
[spacer]
Specification as to whether trip command 3 should latch.
[spacer]
MAIN: Latching trip cmd. 4
021 026
0: No
[spacer]
Specification as to whether trip command 4 should latch.
[spacer]
MAIN: Fct. assign. fault
021 031
060 000: MAIN: Without function Fig. 3-59, (p. 3-91)
[spacer]
Selection of the signals to be signaled as Blocked/Faulty in addition to the
messages that always result in the message Blocked/Faulty.
[spacer]
MAIN: Fct.asg. grp.sig. 01
019 184
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 02
019 185
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 03
019 186
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 04
019 187
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 05
019 188
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 06
019 189
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 07
019 190
060 000: MAIN: Without function
[spacer]
MAIN: Fct.asg. grp.sig. 08
019 191
060 000: MAIN: Without function
[spacer]
Selection up to 32 internal signals to be grouped using Boolean operators NOT,
AND, OR.
7 Settings P634
P634/EN M/R-42-A // P634‑311‑653 7-81