Micom P634 - Page 512

Parameter Address
Default Min Max Unit Logic Diagram
[spacer]
DTOC4: tGS PSx
099 116 099 117 099 118 099 119
0.00 0.00 100.00 s
[spacer]
Setting for the operate delay of the general starting signal of DTOC protection.
[spacer]
DTOC1: Rush restr.enabl PSx
076 063 077 063 078 063 079 063
0: No Fig. 3-109, (p. 3-155)
[spacer]
DTOC2: Rush restr.enabl PSx
076 083 077 083 078 083 079 083
0: No
[spacer]
DTOC3: Rush restr.enabl PSx
076 193 077 193 078 193 079 193
0: No
[spacer]
DTOC4: Rush restr.enabl PSx
099 112 099 113 099 114 099 115
0: No
[spacer]
Setting as to whether the inrush stabilization function (harmonic restraint) of
differential protection shall be able to block the definite-time overcurrent
protection function.
[spacer]
DTOC1: Meas.value I/IN> PSx
060 002 060 003 060 004 060 005
0: Fundamental Fig. 3-108, (p. 3-154)
Fig. 3-111, (p. 3-158)
[spacer]
DTOC1: Meas.val. I/IN>> PSx
060 006 060 007 060 008 060 009
0: Fundamental Fig. 3-108, (p. 3-154)
Fig. 3-111, (p. 3-158)
[spacer]
DTOC1: Meas.val.I/IN>>> PSx
060 010 060 011 060 012 060 013
0: Fundamental Fig. 3-108, (p. 3-154)
Fig. 3-111, (p. 3-158)
[spacer]
DTOC2: Meas.value I/IN> PSx
060 061 060 062 060 063 060 064
0: Fundamental
[spacer]
DTOC2: Meas.val. I/IN>> PSx
060 065 060 066 060 067 060 068
0: Fundamental
[spacer]
DTOC2: Meas.val.I/IN>>> PSx
060 069 060 070 060 071 060 072
0: Fundamental
[spacer]
DTOC3: Meas.value I/IN> PSx
060 073 060 074 060 075 060 076
0: Fundamental
[spacer]
DTOC3: Meas.val. I/IN>> PSx
060 077 060 078 060 079 060 080
0: Fundamental
[spacer]
DTOC3: Meas.val.I/IN>>> PSx
060 081 060 082 060 083 060 084
0: Fundamental
[spacer]
DTOC4: Meas.value I/IN> PSx
099 048 099 049 099 050 099 051
0: Fundamental
P634 7 Settings
7-158 P634/EN M/R-42-A // P634‑311‑653