Micom P634 - Page 690

Parameter Address
Default Min Max Unit Logic Diagram
“Logical”
communication
interface 1
COMM1: Sel.spontan.sig.test
003 180
060 000: MAIN: Without function Fig. 3-13, (p. 3-18)
[spacer]
Signal selection for testing purposes.
[spacer]
COMM1: Test spont.sig.start
003 184
0: don't execute Fig. 3-13, (p. 3-18)
[spacer]
Triggering of transmission of a selected signal as “starting”.
[spacer]
COMM1: Test spont.sig. end
003 186
0: don't execute Fig. 3-13, (p. 3-18)
[spacer]
Triggering of transmission of a selected signal as “ending”.
Parameter Address
Default Min Max Unit Logic Diagram
“Logical”
communication
interface 2
COMM2: Sel.spontan.sig.test
103 180
060 000: MAIN: Without function Fig. 3-15, (p. 3-20)
[spacer]
Signal selection for testing purposes.
[spacer]
COMM2: Test spont.sig.start
103 184
0: don't execute Fig. 3-15, (p. 3-20)
[spacer]
Triggering of transmission of a selected signal as "starting".
[spacer]
COMM2: Test spont.sig. end
103 186
0: don't execute Fig. 3-15, (p. 3-20)
[spacer]
Triggering of transmission of a selected signal as "ending".
P634 8 Information and Control Functions
8-152 P634/EN M/R-42-A // P634‑311‑653