Parameter Address
Default Min Max Unit Logic Diagram
[spacer]
MAIN: Soft Warm restart
003 039
0: don't execute
[spacer]
A warm restart of the software is carried out. The device functions as it does
when the power supply is turned on, except that no hardware tests are carried
out.
[spacer]
MAIN: Warm restart
010 166
0: don't execute
[spacer]
A warm restart is carried out. The device functions as it does when the power
supply is turned on.
[spacer]
MAIN: Soft Cold restart
000 085
0: don't execute
[spacer]
A cold restart of the software is carried out. This means that all settings and
recordings are cleared, but no tests of the hardware are carried out during the
restart. Parameter values used by the P634 after a cold restart have been
selected in such a manner that the P634 is blocked after a cold restart.
[spacer]
MAIN: Cold restart
009 254
0: don't execute
[spacer]
A cold restart is carried out. A cold restart means that all settings and recordings
are cleared. Parameter values used by the P634 after a cold restart have been
selected in such a manner that the P634 is blocked after a cold restart.
Parameter Address
Default Min Max Unit Logic Diagram
Operating data
recording
OP_RC: Reset record. USER
100 001
0: don't execute Fig. 3-71, (p. 3-105)
[spacer]
The operating data memory and the counter for operation signals are reset.
Parameter Address
Default Min Max Unit Logic Diagram
Monitoring signal
recording
MT_RC: Reset record. USER
003 008
0: don't execute Fig. 3-72, (p. 3-106)
[spacer]
Reset of the monitoring signal memory.
P634 8 Information and Control Functions
8-156 P634/EN M/R-42-A // P634‑311‑653
To Next Page
Loading...
