Page 103
Instructions for Operating
optoNCDT 2300
10.2.7 Angle Influences
Tilt angles of the target in diffuse reflection both around the X and the Y axis of less than 5° only have a disturbing effect with surfaces
which are highly reflecting. Tilt angles between 5° and 15° lead to an apparent distance change of approximately 0.12 ... 0.2 % of the
measuring range.
Tilt angles between 15° and 30° lead to an apparent distance change of approximately 0.5 % of the measuring range.
Angle
X-axis Y-axis
Angle
Fig. 54 Angle influences
Angle X-axis % Y-axis %
±5° typ. 0.12 typ. 0.12
±15° typ. 0.2 typ. 0.2
±30° typ. 0.5 typ. 0.5
Fig. 55 Measurement errors through tilting with diffuse reflection
To Next Page
Loading...
