MICRO-EPSILON optoNCDT 2300 - A 6.4.3 Material Data Base; A 6.4.3.1 Reading of Material Data Base; A 6.4.3.2 Choose Material; A 6.4.3.3 Display Material

Page 138
Appendix| ASCII Communication with Sensor
optoNCDT 2300
A 6.4.3 Material Data Base
A 6.4.3.1 Reading of Material Data Base
MATERIALTABLE
Command gives all in the sensor stored materials back.
->MATERIALTABLE
Refraction index
Pos, Name, nF at 670nm, Description
0, Vakuum, 1.000000, Vakuum; air (approx.)
1, Water, 1.337121,
2, Ethanol, 1.361400,
7, PC, 1.599439, Polycarbonate
8, Quartz glass, 1.463126, Silicon dioxide, Fused Silica
9, BK7, 1.522380, Crown glass
->
A 6.4.3.2 Choose Material
MATERIAL <Material name>
Change of material between displacement 1 and 2. Material name must be typed in with a blank. Command differentiates between
upper and lower case lettering.
A 6.4.3.3 Display Material
MATERIALINFO
Command gives material characteristics back.
->MATERIALINFO
Name: BK7
Description: Crown glass
Refraction index nF at 486nm: 1.522380
->