MICRO-EPSILON optoNCDT 2300 - Averaging, Error Processing, Spike Correction and Statistics

Page 59
Control Menu, Set Sensor Parameter
optoNCDT 2300
7.4.4 Averaging, Error Processing, Spike Correction and Statistics
Video averaging No averaging /
Recursive 2 / 4 / 8
Moving 2 / 3 / 4
Median 3
The video averaging is effected before the calculation of
the displacement or thickness. Recommended for very
small peaks respectively to receive more valid data.
Averaging of mea-
surement value
No averaging
Moving N values 2 / 4 / 8 ... 128 Value Indication of averaging mode. The averaging number N
indicates the number of consecutive measurement values
to be averaged in the sensor.
Recursive N values 2 ... 32768 Value
Median N values 3 / 5 / 7 / 9 Value
Error processing Error output, no measurement value Sensor emits error value.
Hold last value 0 ... 1024 Value If no valid measurement value is determined, the last
valid value can be hold for a certain period, that is, output
repeatedly. The last valid value is kept indefinitely at „0“.
Spike correction No
Yes Evaluation length
1 - 10
Value This filter removes individual very high spikes from a rela-
tively constant course of measurement value.
Smaller spikes are preserved.
Max. tolerance range
(mm)
0 - 100
Value
Number of corrected
value 1 - 100
Value
Statistics 2 / 4 / 8 / 16 ... 16384 Beyond a certain number of measurement values the sta-
tistical values minimum, maximum and peak-to-peak are
determined and output.
Grey shaded fields require a selection.
Value
Dark-bordered fields require you to specify a value.