Page 96
Value Output
optoNCDT 2300
9.1.1 Possible Output Values and Output Sequence (RS422)
The selected values are output in the following order:
- Exposure time
- Profile counter
- Time stamp
- Temperature
- Intensity(ies)
- Distance value(s)
- Status
- Trigger counter (with Ethernet only)
- Thickness (difference from distance values)
- Minimum
- Maximum
- Peak to Peak
i
Use the commands GETOUTINFO_ETH and GETOUTINFO_RS422 to check the set output values at the interfaces, see Chap. A
6.5.2.1.
To Next Page
Loading...
