Page 95
Value Output
optoNCDT 2300
With the difference generating in the sensor for the thickness calculation the offset is omitted:
Thickness = distance 2 + offset - (distance 1 + offset)
Example distance measuring:
Digital Out Calculation Result
32760 (32760 * 15.5677E-6 - 0.01) * 10 mm 5 mm (midrange)
16758 (16758 * 15.5677E-6 - 0.01) * 10 mm 2.509 mm
643 (643 * 15.5677E-6 - 0.51) * 10 mm 0.0001 mm (SMR)
i
The video signal can not be transmitted via the RS422 interface.
To Next Page
Loading...
