Page 114
Appendix| Optional Accessories
optoNCDT 2300
IF2030/PNET Interface module for PROFINET connection of a Micro-Epsilon
sensor with RS485 or RS422 interface, suitable for
PC2300-x/SUB-D or PC2300-0,5/Y cables, top-hat rail housing,
incl. GSDML file for software integration in the PLC
Extension clamp RS422
EtherCAT extension clamp to connect two ILD2300 sensors with
a EtherCAT master. Necessary cable: PC2300-x/CSP
IF2004/USB
4 channel converter RS422 to USB useable for cable PCxx00-x/
IF2008 or PC2300-0.5/Y, inclusive driver, connections: 2× Sub-D,
1× terminal block
PS2020
Power supply for mounting on DIN rail, input 230 VAC, output 24
VDC/2.5 A
To Next Page
Loading...
