Page 16
Laser Class
optoNCDT 2300
optoNCDT
ERR
Power on
RUN
EtherCAT Ethernet
Laser off
In range
Midrange
Error
Laser spot
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EXCEPT FOR CONFORMANCE WITH
IEC 60825-1 ED. 3., AS DESCRIBED IN
LASER NOTICE NO. 56, DATED MAY 8, 2019
LASER RADIATION
Do not stare into beam
Class 2 Laser Product
IEC 60825-1: 2014
P 1mW; P 1.2mW; t=0.5...542 s
0 P
≤ ≤ μ
F=1.5...50kHz;
=405nm
Fig. 2 True reproduction of the sensor with its actual location of the warning labels, ILD2300-x BL
i
If both warning labels are covered over when the unit is installed the user must ensure that supplementary labels are applied.
To Next Page
Loading...
