Page 173
Appendix| EtherCAT
optoNCDT 2300
0601 0001 Attempt to write to a “read-only parameter“
0601 0002 Attempt to write to a “read-only parameter“
0602 0000 Object (parameter) is not listed in the object directory
0604 0041 Object (parameter) is not mapped on PDO
0604 0042 Number or length of objects to be transmitted exceeds PDO length
0604 0047 General internal device incompatibility
0606 0000 Excess denied because of a hardware error
0607 0010 False data type or length of service parameter is incorrect
0607 0012 False data type or length of service parameter is too large
0607 0013 False data type or length of service parameter is too small
0609 0011 Subindex does not exist
0609 0030 Invalid value of parameter (only for write access)
0609 0031 Value of the parameter too large
0609 0032 Value of the parameter too small
0609 0036 Maximum value deceeds minimum value
0800 0000 General error
0800 0020 Data can not be transmitted or saved in application
0800 0021 Data can not be transmitted or saved in application, because of local control
0800 0022 Data can not be transmitted or saved in application, because device state
0800 0023 Dynamic generation of object directory failed or no object directory is available
To Next Page
Loading...
