Page 32
Installation | Housing M
optoNCDT 2300
Start of measuring range
End of measuring range
SMR
MR
150 (5.90)
80 (3.15)
70 (2.76)
140 (5.51)
130 (5.52)
15 (0.59)
12 (0.47)
17.5 (0.69)
35 (1.38)
91.6 (3.61)
76 (2.99)
3 x Through
hole ø4.5
(0.18 dia.)
ø5 (1.20 dia.)
If the laser beam does not strike the object surface at a per-
pendicular angle, measurements might be inaccurate.
Mount the sensor using the through-bores and three M4
or M5 screws from the accessories.
MR 200 (7.87) 300 (11.81)
SMR 130 (5.12) 200 (7.87)
MMR 230 (9.06) 350 (13.78)
EMR 330 (12.99) 500 (19.69)
a
25.1° 18,3°
j
16.7° 12,2°
e
13.1° 9.6°
A 91.6 (3.61) 99.4 (3.91)
B 76.0 (2.99) 81 (3.19)
MR = Measuring range
SMR = Start of measuring range
MMR = Midrange
EMR = End of measuring range
Dimensions in mm (inches)
Fig. 11 Dimensional drawing and free space for the measuring
range 200/300 mm
To Next Page
Loading...
