Page 35
Installation | Housing L
optoNCDT 2300
If the laser beam does not strike the object surface
at a perpendicular angle, measurements might be
inaccurate.
Mount the sensor using the through-bores and
three M5 or M6 screws from the accessories.
MR = Measuring range
SMR = Start of measuring range
Dimensions in mm (inches)
Fig. 14 Dimensional drawing and free space for the
sensor ILD 2310-50
MR=
50 (1.97)
SMR=
550 (21.65)
29.5
(1.16)
132.3
(5.21)
Optically active,
field to kept free
95
(3.74)
(.94)
5
(.20)
24
(.94)
48
(1.89)
71 (2.80)
14
(.55)
5 (.20)
ø6 (.24 dia.)
73 (2.87)
83 (3.26)
61 (2.40)
To Next Page
Loading...
