Page 39
Installation
optoNCDT 2300
The different periphery devices can be connected by the illustrated connection cables to the 14-pin sensor plug, see Fig. 19. The
devices PCI interface card IF2008, 4-way converter IF2004/USB and universal controller CSP2008 also supply the operating voltage
(24 V DC) of the sensor via the appropriate connection cable.
Peripheral Sensor channels Interface
IF2001/USB one
RS422
IF2030/PNET one
C-Box/2A two
Extension terminal RS422 two
IF2004/USB four
IF2008/PCIE, PCI interface card four
Ethernet (network, PC) any
Ethernet / EtherCAT
EtherCAT (master) any
PLC, ILD2300 or the like --- Synchronization
Switch, button, PLC or the like --- Switching input laser On/Off
Fig. 18 Max. sensor channels on the peripheral devices
To Next Page
Loading...
