3-44 PCWS 2015 Setup Guide - 2nd Edition
What’s Inside?
Installing Options
Configuring the 2nd Drive
After you install the 2nd drive, the next time POSReady or Windows 7 starts, it
will automatically detect the drive. However, you must use the Disk
Management utility to partition and format the drive before it can be used. This
is true if installing a new drive or a previously used drive.
To start the disk manager, from the Control Panel, select Administrative Tools
-> Computer Management -> Storage -> Disk Management.
When you start Disk Management, a prompt may appear requesting that you
Initalize the disk before the Disk Manager can access it. Press [OK] to initalize
the disk.
Once the drive is initialized, it must be partitioned, formatted and a drive letter
assigned.
To Next Page
Loading...