FUEL SUPPLY ± Fuel Tank
13B-2
FUEL TANK
REMOVAL AND INSTALLATION
Pre-removal Operation
D Fuel Draining
D Reduce the Inner Pressure of Fuel Line and Hose
(Refer to GROUP 13 ± On-vehicle Service.)
D Center Exhaust Pipe Removal
(Refer to GROUP 15.)
D Rear Propeller Shaft Removal
(Refer to GROUP 25.)
Post-installation Operation
D Fuel Supplying.
D Checking for Fuel Leaks
D Rear Propeller Shaft Installation
(Refer to GROUP 25.)
D Center Exhaust Pipe Installation
(Refer to GROUP 15.)
1
2
4
5
6
7
8
10
12
13
14
15
16
17
18
19
20
11
9
23
22
3
21
5
10
12
19
2 ± 3 Nm
2 ± 3 Nm
2 ± 3 Nm
2 ± 3 Nm
13 ± 16 Nm
Removal steps
1. Parking brake cable clamp
mounting nut
2. Filler hose
3. Leveling hose
"AA 4. High pressure tube connection
5. Vapour hose connection
6. Return hose connection
7. Harness connector connection
8. Fuel tank assembly
"AA 9. High pressure tube
10. Return hose
"AA 11. Suction tube
12. Vapour hose
13. Fuel check valve
14. Fuel tank harness
15. Fuel pump module
16. Retainer plate
17. Packing
18. Pipe and gauge assembly
19. Valve assembly
20. Fuel filler cap
21. Filler neck protector
22. Filler neck assembly
23. Packing
To Next Page
Loading...
