INTAKE AND EXHAUST ± Intake Manifold
15-5
REMOVAL SERVICE POINT
A FUEL PUMP PROTECTOR REMOVAL
Lift up the transmission with a jack to create clearance between
the engine and the front deck, and remove the fuel pump
protector.
INSPECTION
Check the following points; replace the part if a problem is
found.
INTAKE MANIFOLD CHECK
1. Check for damage or cracking of any part.
2. Using a straight edge and thickness gauge, check for
distortion of the cylinder head installation surface.
Standard value: 0.15 mm or less
Limit: 0.20 mm
To Next Page
Loading...
