FRONT AXLE ± Differential Carrier
26-33
DISASSEMBLY SERVICE POINTS
AA" DIFFERENTIAL CASE ASSEMBLY REMOVAL
Remove the differential case assembly with a hammer handle
or the like.
Caution
When taking out the differential case assembly, be careful
not to drop and damage the side bearing outer races.
NOTE
Keep the right and left side bearing outer races and side
bearing spacers separate, so that they do not become mixed
at the time of reassembly.
AB" SIDE BEARING INNER RACE REMOVAL
NOTE
There are two notches provided (at the differential case side)
for the jaws of the special tool; use the special tool at that
position.
If the special tool jaws cannot be inserted between the
differential case and the bearing inner race, file the jaw tips
as necessary.
AC" DRIVE GEAR REMOVAL
1. Make the mating marks on the differential case and the
drive gear.
2. Loosen the drive gear attaching bolts in diagonal
sequence to remove the drive gear.
AD" SELF-LOCKING NUT REMOVAL
MB990810
MB990811
Mating marks
MB990850
To Next Page
Loading...
