FRONT AXLE ± Differential Carrier
26-34
AE" DRIVE PINION ASSEMBLY REMOVAL
1. Make mating marks on the drive pinion and the companion
flange.
Caution
The mating mark must not be on the coupling surface
of the companion flange and the front propeller shaft.
2. Use the special tool to drive out the drive pinion.
AF" DRIVE PINION FRONT BEARING INNER RACE
REMOVAL
AG" OIL SEAL/DRIVE PINION REAR BEARING INNER
RACE/DRIVE PINION REAR BEARING OUTER
RACE REMOVAL
AH" DRIVE PINION FRONT BEARING OUTER RACE
REMOVAL
AI" LOCK PIN DRIVE OUT
Companion
flange
MB990810
MB990560
MB990939
MB990939
Punch
To Next Page
Loading...
