REAR SUSPENSION ± Rear Suspension Assembly
34-5
LATERAL ROD BUSHING REPLACEMENT
1. Use a press to press in and out the bushing.
2. Apply ample amount of soapy water to the outer surface
of the bushing and inner surface of the lateral rod pipe,
and then press-fit the bushing so that both ends protrude
evenly.
UPPER ARM BUSHING/LOWER ARM BUSHING
REPLACEMENT
UPPER ARM REAR BUSHING, LOWER ARM REAR
BUSHING
1. Use the special tools and a press to press in and out
the bushing.
SPECIAL TOOL
Item Upper arm rear bushing Lower arm rear bushing
A MB990947 MB990947
B MB990832 MB990831
C MB990847 MB990847
D MB991154 MB991155
2. Apply ample amount of soapy water to the outer surface
of bushing and inner surface of arm pipe, and then press-fit
the bushing so that both ends protrude evenly.
UPPER ARM FRONT BUSHING, LOWER ARM FRONT
BUSHING
1. Use a press and the special tools to press in and out
the bushing.
NOTE
Press in the bushing from the chamfered side of the arm
pipe.
2. Install the bushing so that both ends protrude evenly.
A
Driving out
Press-
fitting
B
C
A
D
B
C
Upper arm
Lower arm
MB990958
MB990983
Bushing
Cham-
fered
portion
To Next Page
Loading...
