ENGINE <4G9-GDI> ± Camshaft and Camshaft Oil Seal
11A-20
" CA CAMSHAFT OIL SEAL INSTALLATION
1. Apply engine oil to the entire circumference of the oil seal
lip.
2. Press-fit the oil seal as shown in the illustration.
" DA CAMSHAFT SPROCKET INSTALLATION
Use the special tool to secure the camshaft sprocket in the
same way as during removal, and then tighten the bolt to
the specified torque.
Tightening torque: 88 Nm
MD998713
To Next Page
Loading...
