STEERING ± Power Steering Gear Box Box and Linkage
37A-22
DISASSEMBLY SERVICE POINTS
AA" RACK SUPPORT COVER REMOVAL
AB" OIL SEAL/PINION AND VALVE ASSEMBLY
REMOVAL
With a plastic hammer, lightly tap the pinion and valve assembly
in its spline to remove the lower oil seal and pinion and valve
assembly from the valve housing.
AC" SEAL RING REMOVAL
Cut the seal ring to remove from the pinion and valve assembly.
Caution
When cutting the seal ring, be careful not to damage the
pinion and valve assembly.
AD" UPPER BEARING/UPPER OIL SEAL REMOVAL
Using a socket, pull out the upper oil seal and bearing from
the valve housing.
AE" CIRCLIP REMOVAL
1. Turn the rack stopper clockwise until the circlip end comes
out of the slot in the rack housing.
2. Turn the rack stopper anticlockwise to remove the circlip.
Caution
Do not turn the rack stopper anticlockwise first.
Otherwise, the circlip will get caught in the slot in
the housing, which makes the rack stopper unable
to turn.
MB991621
Socket
Rack stopper
Circlip
To Next Page
Loading...
