STEERING ± Power Steering Gear Box and Linkage
37A-25
Caution
Do not use Dia Queen ATF SPII and ATF SPII M as
they damage the components of the power steering.
2. Apply the specified fluid to the oil seal inner surface and
the O-ring.
Specified fluid:
Automatic transmission fluid
DEXRON or DEXRON II
Caution
Do not use Dia Queen ATF SPII and ATF SPII M as
they damage the components of the power steering.
3. Wrap the rack end with plastic tape, and push the rack
bushing onto the rack.
" EA CIRCLIP INSTALLATION
Align the mark on the rack stopper and the slot in the cylinder.
Then, insert the circlip into the rack stopper hole through the
cylinder hole. Turn the rack stopper clockwise and insert the
circlip firmly.
" FA UPPER OIL SEAL/UPPER BEARING
INSTALLATION
" GA SEAL RING INSTALLATION
After installation, using the special tool or by hand, compress
seal rings that expand during installation.
Rack bushing
Plastic tape
Rack
Circlip
Slot
Circlip
Slot
Upper oil
seal
MB990925
(MB990938)
MB990925
(MB990938)
MB991203
MB991203
Bearing
MB991317
To Next Page
Loading...
