EXTERIOR ± Windshield Wiper and Washer
51-13
WASHER MOTOR CHECK
1. With the washer motor installed to the washer tank, fill
the washer tank with water.
2. Check that the water squirts out strongly when battery
voltage is applied to terminal (2) and terminal (1) is earthed.
WASHER FLUID EJECTION POINT CHECK
Adjust the ejection angle by moving the nozzle.
Item Distance mm Item Distance mm
A 350 E 320
B 475 F 200
C 165 G 310
D 200 H 200
50 mm
Area to be ejected
<Passen-
ger's side>
Ceramic end line
A
B
D
E
G
H
<Driver's side>
50 mm
A
Ceramic end line
C
C
F
F
G
B
E
H
D
<Passen-
ger's side>
L.H. drive vehicles
R.H. drive vehicles
<Driver's side>
50 mm
110 mm
Area to be ejected
To Next Page
Loading...
